PRODUCTSCurrent location :HOME > PRODUCTS > Insulation hangers
Self Adhesive Insulation Hanger
  • Self Adhesive Insulation Hanger
  • Self Adhesive Insulation Hanger
  • Self Adhesive Insulation Hanger
  • Self Adhesive Insulation Hanger
Self Adhesive Insulation Hanger
【Brief】:

Material:

  • Galvanized Steel (Standard)
  • Available in Stainless Steel & Aluminum as special order

Other details:

  • Standard Lengths are listed above
  • Other lengths available as Special Order
  • Packaging: 1,000 pcs/ctn up to 2-1/2"
  • 500 pcs/ctn up to 8" 
  • Hangers are available packed with, or without washers
【Series】:Insulation hangers
Description

Self Adhesive Insulation Hangers

Self-Adhering Hangers are designed to attach insulation to clean, dry, smooth, non-porous surfaces.
After the hanger is installed, the insulation is impaled over the spindle & secured with a self-locking washer. Due to the 

nature of adhesives, it is important that the user read & follow the guidelines. It is the responsibility of the user to determine

 the suitability of the intended application.

Specification of self adhesive insulation hangers

pin thickness base washer size Length
10ga,12 ga, 14ga 35,40,45,50mm Square w/tape 1"
10ga,12 ga ,14ga 35,40,45,50mm Square w/tape 1-5/8"
10ga,12 ga,14ga  35,40,45,50mm Square w/tape 2"
10ga,12 ga ,14ga 35,40,45,45mm Square w/tape 2-1/2"
10ga,12 ga ,14ga 35,40,45,50mm Square w/tape 3-1/2"
10ga,12 ga ,14ga 35,40,45,50mm Square w/tape 4-1/2"
10ga,12 ga ,14ga 35,40,45,50mm Square w/tape 5-1/2"
10ga,12 ga ,14ga 35,40,45,50mm Square w/tape 6-1/2"
10ga,12 ga ,14ga 35,40,45,50mm Square w/tape 8"


Drawing of self adhesive insulation hangers


Advantages of self adhesive insulation hangers


                                                                        No adhesive required, No toxic fumes, No tools needed, Positive adhesion, Clean, fast & simple

Application of self adhesive insulation hangers

Best results are obtained when ambient temperature is above 40° F at the time of application. Remove the release paper from the base plate and apply hanger to a suitable flat surface. A firm straight, forward pressure should be used. Do not twist. Due to the quick-tack nature of the adhesive, it is very important that the release paper not be removed until ready to apply the hanger. Insulation may be applied immediately after properly securing the hanger. Hangers should be stored at 75° F and 50% relative humidity. It is important that stock be rotated. Shelf life is estimated at 2 years if stored as recommended.


Pre:Metal Insulation Pins
Next:Metal Insulation Stick Pins
CONTACT US
  • FOLLOW US:
ABOUT US
Company Profile
Company Equipment
PRODUCTS
Insulation Pins
Weld Pins
Self Adhesive Stick Pins
Self Locking Washer
BIMetallic Insulation Pins
Dome caps clip
NEWS
Company News
Industry News
Copyright © 2017 Hebei XiangYi Metal Manufacturing Limited All Right Reserved